piControl-System E-Paper
Self-sufficient Terminal
Energy self-sufficient multifunction terminal with RFID reading function for checking and controlling stations and objects
Description
The energy self-sufficient terminal system piControl-System is a powerful operating unit that meets the requirements of the latest IoT solutions.
piControl system represents an extremely energy-saving access system, which collects customer data over a long period of time in an energy self-sufficient manner. Secure access control is possible via an integrated RFID reader. An e-paper display allows information to be read even in direct sunlight.
Possible uses: the diverse functions allow the device to be used, for example, for time recording, warehouse management, product tracking or even for determining tourist paths.
What is special?
Technical data
Basis
Dimensions |
190 mm x 130 mm x 52 mm |
IP protection class |
IP67 |
Housing |
individually configurable robust plastic housing |
Temperature Range |
Operating temperatur 0 to 40°C Storage temperature -20 to 85°C |
Antenna |
GSM (internal) GPS Antenna (internal) BT-Antenna (internal) |
Cooling |
Passive und fanless cooling |
Power Supply |
6,5-16V (12V nominal) or internal Power supply for 6 months |
Battery Pack |
rechargeable backup battery (Li-ion) |
Interfaces
BT |
5.0 or 4.2 BT Low Energy |
Cellular |
2G |
Serial |
TTL-UART |
Programming Interface |
JTAG |
RFID / NFC |
13,56 Mhz full NFC forum compliancy |
More Properties
Sensors |
3-axis inertial measurement unit Accelerometer 16 bit, ±16g 3-axis gyroscope 16 bit, 2000 °/s |
Storage |
20 kB RAM / 128 kB Flash |
RTC |
Real Time Clock |
Real Time Clock |
2 x digital Input(12V) 2 x Output Vin 2 x Output (Vin / GND) |
SIM |
customer-specific selectable (embedded SIM chip or nano SIM card) |
Signaller |
acoustic (buzzer) 95dB max |
Processor |
STM32 - high performance processor with power saving function |
Display |
E-Paper 264 x 176 px b/w 2.7 inches, RGB illuminated |