piCAN-RFID Station CAN-Bus

RFID Reader with CAN

RFID (NFC) access system for stations

Long range 13.56MHz RFID NFC reader for access control and object identification. The RFID reader is programmable and inexpensive.

Order number

91180010

Request here

Data sheet

Description
Technical data
Properties
Areas of application
Downloads
Software

Description

The RFID reader piCAN-RFID is used to read and write to RFID cards with a working frequency of 13.56 MHz. The NFC standard (Near Field Communication) is supported through the use of the latest RFID reading technology. The RFID antenna integrated into the device has a range of at least 3 cm.

Two digital inputs enable the connection and evaluation of e.g. door sensors. The dual 12V / 750mA outputs enable the connection of up to two LEDs. The integrated PWM drivers can be used, for example, to regulate the LED brightness of locker lighting. A CANOpen interface is used for external communication with the RFID device. The 12V power supply is provided via the standardized CAN bus.

Thanks to the integrated microcontroller, the device can be configured and programmed according to the application.

What is special?

energy saving
made in Germany

Technical data

Basis

Power Supply	12V/0.06A via CAN Bus
Controller	16-Bit Fujitsu des Typs F²MC-16FX
RFID	supports ISO 14443A und ISO 15693 Frequency: 13.56MHz Range: max. 3cm
NFC	Supports Near Field Communication Standards NFCIP-1 (ISO/IEC 18092) und NFCIP-2 (ISO/IEC 21481) Frequency: 13.56MHz Range: max. 2cm
Board size	121mm x 71,13mm
Housing	ABS 100/35 LG 130mm x 80mm x 35mm (L x B x H)