piCAN-Pocket-Charger
Pocket Charger eBike & Stromer
E-bike charger with interface for over-the-air monitoring of the charging process. The charger is EnergyBus 2.0 compatible.
System solutions:
https://obalu.eu
Description
This compact and lightweight charger for e-bikes and pedelecs enables safe and intelligent charging. The pocket charger communicates with the battery to be charged via a CAN interface. The exchange of information takes place via the standardized EnergyBus 2.0 protocol or the special protocols of the drives installed in the e-bikes.
The correct charging voltage and the optimal charging current are determined and provided by automatic communication with the battery to be charged. This compatibility with battery systems from a wide range of battery manufacturers ensures that this handy charger can be connected to a large number of e-bikes from different manufacturers. The charging process can be monitored via a BT 4.0 (low energy) interface and additional information can be read from the bike system and displayed on a mobile device.
Applications
What is special?
Technical data
Basis
|
Input Voltage |
190 to 264 V AC |
|
Input Frequenzy |
47 to 64 Hz |
|
Charging Output Voltage |
21 to 54,6 V |
|
Output Current(nominal) |
max. 2 A |
|
Output Power AUX (nominal) |
12V / 0,5A |
Interfaces
|
CAN |
EnergyBus Supports EnergyBus/CANOpen 454 |
|
More Interfaces |
BT 4.0 Low Energy |
More Properties
|
Cooling |
aktiv |
|
Size |
136mm x 60mm x 40mm (T/W/H) |
|
Temperature Range |
-10°C to +60°C |
|
Compatible with the following battery types |
Stromer ST1 Stromer ST2 Gobax EB Energy Bike 1 wire (from Rev01.10) Brose (from Rev01.10) Bosch (from Rev01.10) Derby Cycle (DIN plug) Yamaha (4 pol. special connector) Panasonic 26V Ansmann (coded ROPD plug) Marquardt Heinzmann Samsung SDI BMZ 42V BMZ 54,6V GIANT Y |
Areas of application
Function
Data sheet
Inquire now without obligation
