piA-AM335x-PM TI ARM
Processor Module TI ARM IPC
Universal Computer-On-Module (COM) based on Sitara AM355x for cheap IoT solutions.
Description
The piA-AM335x-PM module offers an inexpensive and flexible entry into Linux component development. All processor signals are brought out via two connector strips and can be configured according to the required interfaces.
You get a running Linux and professional support from our developers.
This module carries the necessary ICs to run a Linux autonomously. All Sitara interfaces are routed to 2 connectors, so that any functional device can be developed. Inexpensive baseboards only contain the required peripheral interfaces, the processor module brings out all available interfaces. This enables fast and effective processor board development.
Advantages
- Accelerated development of your product
- A wide range of possible uses thanks to the large number of freely configurable interfaces
- Simple and fast systen integration
What is special?
Technical data
Basis
Processor |
Sitara™ AM335x ARM Cortex-A8 Microprocessor (MPU) up to 1GHz Cortex™-A8 Core up to 2000 MIPS Crypto Hardware Accelerators (AES, SHA, PKA, RNG) |
RAM |
up to 512MB DDR3 SDRAM |
Flash |
up to 16 GB eMMC, 128Mbit NOR Flash, FRAM |
Interfaces
Ethernet |
2 x 10/100/1000 Mbps Ethernet MAC |
Display |
24-bit LCD Interface |
ADC |
7 x ADC, 12-bit |
CAN-Interface |
up to 2 x CAN |
UART |
up to 6 x UART |
USB |
2 x USB Ports (OTG possible) |
Audio |
up to 2 x 4-Kanal McASP |
Internal Communikation |
2 x SPI, 2 x I²C |
GPIO |
up to 96 x 3.3V GPIO |
More Properties
Board Size |
60mm x 45mm |
Power Supply |
5V ± 5% |
Temperature range |
-40°C to +85°C |
LED |
Status LED Power Good LED |
RTC |
Real Time Clock |
Software
Poky 3.1.13 (Dunfell), Kernel 5.10.x |
Ångström Linux, Kernel v4.4.54 |
Open source SDK with required libraries |
Hardware Documentation |
Software Documentation |
Areas of application
Baseboard Development