piSmart-Gateway LTE NB-IoTLTE Cat.M1 / NB-IoT / EGPRS
Energy-saving gateway with a large transmission range. Perfectly applicable for measurement and control data acquisition.
Overview
The piSmart-Gateway-LTE NB-IoT meets the requirements of modern IoT solutions. It is used both as a data interface and as a data logger for GSM location, rental, device control, device diagnosis, location-independent software updates, remote diagnosis, telemetry / remote measurement, sensor-dependent: pressure, voltage, temperature, current, moisture detection, operating hours / runtime detection , Engine number acquisition used.
The gateway enables location-independent administrative management of the devices (e.g. eScooter). It records the position and operating data and forwards it directly to a higher-level system (e.g. computer, cloud or app). The devices equipped with the piSmart gateway LTE NB-IoT form an effective, highly modern sensor network.
Details
Basics
Supply voltage | 6.5-55V DC |
Battery pack | rechargeable support battery (LiIonen) |
Cooling | Passive and fanless cooling |
Antennas | GSM (external), Bluetooth antenna (internal) |
Temperature range | Charge the battery between 0 and 45 ° C |
Dimensions | 79 mm x 50 mm x 13.5 mm (D / W / H) |
Interfaces
Bluetooth | 5.0 or 4.2 Bluetooth Low Energy |
Radio data transmission | 2G, LTE NB-IoT |
Serial | TTL-UART |
Programming interface | JTAG |
CAN bus | CANopen |
IO interfaces | 1 x entrance (open drain) |
Other characteristics
Sensors | Inertial measuring unit with 3-axis acceleration sensor 16 bit ± 16 g 3-axis gyroscope 16 bit, 2000 ° / s 9D motion sensor 3-axis magnetic field sensor |
Storage | 20 kB RAM / 128 kB Flash |
RTC | Real time clock |
SIM | customer-specific selectable (embedded SIM chip or nano SIM card) |
Signal generator | acoustic (buzzer) |
Galery
Downloads
See also
Flexible Internet of Things data aquisition gateway
IoT sensor for mobile devices for data acquisition and signal transmission.
Future-proof gateway with high and reliable data transmission with low energy consumption
Device for air quality measurement in closed rooms. With the self-calibrating AIR GOOD traffic light you always keep an eye on the quality of the air in the rooms. The integrated air quality sensor measures VOC, relative humidity, barometric pressure and ambient temperature. From all these data the condition of the indoor air IAQ (Index of Airquality) is determined.
