Development board of the piA-AM5728-PM with the basic interfaces. Suitable for the pre-development of IoT solutions.
The piA-AM5728-SK module is a starter kit for the development of embedded systems and mobile devices. All available hardware and software functions are perfect for commissioning the piA-AM5728 processor module.
The processor module, which is based on the ARM® Cortex ™ -A15 32-bit architecture, is plugged onto this base board via two 100-pin connectors that are suitable for industrial use and is thus connected to the board.
The common interfaces such as Ethernet 10 / 100Mbit, USB and CAN bus are supported by the starter kit module piA-AM5728-SK. 44 processor signals are directly accessible from the outside via an expansion connector.
With our starter kit board you create a future-proof entry into the development of Linux-based devices. If you have special development requests and require larger quantities, we can adapt the piA-AM5728-SK module to meet customer requirements.
With the ultra-modern module piA-AM5728-SK you have the following advantages:
- fast development of your product
-freely configurable interfaces offer a wide range of possible uses
-system integration is quick and easy
Platinengröße | 67 x 57 mm |
Spannungsversorgung | +5V DC |
Temperaturbereich | -40°C - +85°C |
Ethernet | Gb ethernet |
USB | 2 x USB ports (USB 3.0 host, USB 2.0 slave) |
SD card host | for µSD card |
CAN interface | 1 x CAN bus, 1 x microbus |
Debug terminal | via mini USB virtual COM port |
Button | 1 x reset 1 x button for selecting the boot medium |
Other interfaces | HDMI |
Board size | 67 x 57 mm |
Power supply | + 5V DC |
Temperature range | -40 ° C - + 85 ° C |
Yocto 3.1 (Dunfell), Kernel 5.4 |
Open source SDK with required libraries |
Starter kit for commissioning of processor modules and fast development of embedded systems.
DIN rail IPC with the A15ARM® Cortex ™ Multicore AM5728 and Linux development environment for effective application development.
New generation Sitara AM5728 Computer-On-Module (COM) suitable for modular construction.
Development board of the piA-AM5728-PM with the basic interfaces. Suitable for the pre-development of IoT solutions.
Universal Computer On Module (COM) based on Sitara AM355x for low-cost IoT solutions.